.product_section .product_form, .product_gallery { opacity: 1; } .multi_select, form .select { display: block !important; } .image-element__wrap { display: none; }

How to Install a 2014-2017 Hyundai Elantra Front Bumper

1 min read

Installing your 2014-2017 Hyundai Elantra Front Bumper can be one of easiest to do by following the steps provided in this tutorial.

What you'll need will be the following:

10 mm wrench or socket wrench
Flat head screwdriver
Philips screwdriver
Custom painted Hyundai Elantra Front Bumper

1. Mount the front bumper

2. Secure the top with push pins, there are about 6 of those, 3 on each side.

3. Snap the bumper into the brackets

4. Secure the bumper with a bolt

5. Repeat steps 3 and 4 on the other side using a 10mm socket wrench

6. Tuck the fender liner in on both sides

7. Secure the fender liner at the bottom of the bumper

8. Make sure everything is lined up

You can also watch the installation video here.

DISCLAIMER: While ReveMoto tries to make the information in this blog as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this blog shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this blog.