-
- Painted Bumpers
- Painted Bumper End Caps / Extensions
- Painted Door Shells
- Painted Fenders
- Painted Fender Flares
- Painted Gas Lid Covers
- Painted Grilles
- Painted Hoods
- Painted Rocker Panels
- Painted Side View Mirrors
- Painted Side View Mirror Covers
- Painted Spoilers
- Painted Tailgates
- Painted Tow Hook Covers
-
- Chevrolet Camaro: LS/LT to SS Front Bumper Conversion (For 2010-2013 models)
- Infiniti Q50: Q50 to Q50s Sport Front Bumper Conversion (For 2014-2017 models)
- Lexus CT200H: CT200H to F-Sport Front Bumper Conversion (For 2011-2017 Models)
- Scion FRS to Toyota 86 Front Bumper Conversion (For 2013-2016)
- Toyota Tacoma: 3rd Generation TRD Hood Conversion (For 2016-2020 models)
- Toyota 4Runner: Hood and Scoop Conversion (for 2010-2022 Models)
- Toyota Tundra: Chrome Delete Conversion Kit (For 2022 Model)
- Toyota Tacoma: Rear End Caps Chrome to Painted Conversion (For 2016-2023 Models)
- Request Conversion Parts
- Customer Reviews
- Request Car Part
- PAINT MATCH GUARANTEE
- FAQ
- HELP
- ORDER STATUS
- 281-561-5300
- Login
How to Replace a 2011-2014 Ford F-150 Side Mirror: Step-by-Step Guide
A Ford F-150 side mirror replacement is straightforward but requires removing the door panel. This guide walks you through the process step by step.
Required Tools:
- New F-150 side mirror
- Phillips-head screwdriver
- Flat-head screwdriver
- Socket wrench set (8mm and 11mm)
- Using a flat-head screwdriver, carefully pry off the inner door handle cover to expose the bolt underneath.
- Remove the armrest cover by inserting a flat-head screwdriver along the edge and gently lifting upward to release the clips.
- With an 8mm socket wrench, remove the bolt that was hidden behind the door handle cover.
- Remove the bolt in the armrest area using the same 8mm socket wrench.
- Locate and remove the two 8mm bolts at the bottom of the door panel.
- Gently slide the door panel upward to release the plastic tabs from the metal door frame. Start from the bottom and work your way up.
- With the panel partially removed, locate and remove the three 11mm bolts that secure the side-view mirror to the door.
- Remove the plastic cover that protects where the mirror base connects to the door panel.
- Carefully disconnect the electrical wiring harness from the old mirror assembly.
- Take your new side-view mirror and position it against the mounting points on the door.
- Connect the electrical wiring harness to the new mirror, ensuring it clicks into place.
- Install the three 11mm nuts by hand first, then secure them with the socket wrench. Don't overtighten.
- Replace the inner door handle cover by snapping it back into position.
- Carefully realign the door panel, ensuring the top edge lines up perfectly before securing the sides and bottom.
- Reinstall all bolts: one in the door handle area, one in the armrest, and two at the panel bottom.
- Test the mirror's functionality, including power adjustment and turn signals if equipped.
Installation Complete. Double-check all connections and ensure there are no loose parts or rattling sounds.
You can check out our installation video here:
DISCLAIMER: While ReveMoto tries to make the information in this blog as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this blog shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this blog.