-
- Chevrolet Camaro: LS/LT to SS Front Bumper Conversion (For 2010-2013 models)
- Infiniti Q50: Q50 to Q50s Sport Front Bumper Conversion (For 2014-2017 models)
- Lexus CT200H: CT200H to F-Sport Front Bumper Conversion (For 2011-2017 Models)
- Scion FRS to Toyota 86 Front Bumper Conversion (For 2013-2016)
- Toyota Tacoma: 3rd Generation TRD Hood Conversion (For 2016-2020 models)
- Toyota 4Runner: Hood and Scoop Conversion (for 2010-2022 Models)
- Toyota Tundra: Chrome Delete Conversion Kit (For 2022 Model)
- Toyota Tacoma: Rear End Caps Chrome to Painted Conversion (For 2016-2023 Models)
- Request Conversion Parts
- Customer Reviews
- Request Car Part
- PAINT MATCH GUARANTEE
- FAQ
- HELP
- ORDER STATUS
- 281-561-5300
- Login
How To Remove Your 2018-2020 Honda Accord Front Bumper
If you are thinking of changing your front bumper but aren't sure if you'll be able to do it yourself, you've come to the right place. Here's a step by step instructions on how to remove your 2018-2020 Honda Accord front bumper.
The tools you'll need are the following:
Philips screwdriver
Flat Head screwdriver
-
Panel clip remover tool
1. Open the hood.
2. Loosen the clips off the top of the front bumper.
3. On the side, remove three clips using a panel clip removal tool or flat head screwdriver. Be careful not to break the clips as you can use it when you install a new bumper.
4. Remove the radiator cover.
5. Remove the clips underneath the front bumper using a panel clip removal
6. Remove the clips on the splash shield/lower engine cover, still underneath the car. There are a total of eighteen clips underneath.
7. Pull out the lower engine cover.
8. Twist the wheel to loosen the fender liner.
9. Remove two screws and a clip on the side of the fender liner.
10. Pull the front bumper gently off the bumper retainer.
11. Repeat the steps 8, 9 and 10 on the other side.
12. Gently pull the whole front bumper a little bit, just enough to remove the plugs of the fog lights.
13. Unplug the fog light connectors
14. Remove the front bumper completely.
DISCLAIMER: While ReveMoto tries to make the information in this blog as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this blog shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this blog.